
Why organisations should prioritise systematic continuous improvement as a strategic priority
Continuous improvement is one of the most important ways to ensure compliance with regulatory operations and successful organisational performance. By continuously identifying areas for improvement, education and training organisations can ensure compliance to the regulatory requirements and standards, improve their performance and also gain an edge over their competitors.
Continuous improvement requires strategic attention by leaders and a culture that prioritises continuous improvement as a strategic priority.
One of the key benefits of prioritising systematic continuous improvement is that it provides organisations with an opportunity to develop and sustain a competitive advantage in their industry or market.
In order to stay ahead of the competition, organisations should prioritise systematic continuous improvement as a strategic priority. This is because it will lead to more innovation and competitive advantage.
The term “culture of continuous learning” has been coined by Carol Dweck who defined this as “a process of creating conditions that lead to an organisation where learners are operating at their full potential”.
Organisations can achieve this by developing a new mindset that is driven by continuous improvement. This means that they will need to transform their culture into a culture that values continuous improvement. If they cannot do this, then they are in danger of becoming obsolete already in the future when new technologies come into play.
Systematic continuous improvement has many benefits like improved customer satisfaction, improved revenue generation, improved brand value and improved employee engagement.
There is a long list of reasons why organisations should prioritise systematic continuous improvement as a strategic priority. These include:
– It is an approach that celebrates change and challenges the status quo;
– Improving the performance of an organisation through improved customer service and increased revenues
– Continuous innovation and creation of new products/services for future customers
– Improved profitability
– Improved quality of life of employees
– It is a customer-focused strategy: businesses must use an innovative approach to create value for customers;
– it facilitates learning opportunities: through systematic continuous improvement, businesses can learn from mistakes and drive innovation
– Increasing profitability and performance
– Reaching a company’s goals and objectives with greater certainty
– Saving time and effort when implementing new strategies from start to finish
– Reducing the risk of making mistakes
– Making good decisions in uncertain, fast-moving environments
The most compelling reason for prioritising systematic continuous improvement is that it increases the chance of achieving the business goals.
7 months ago

Related News
14 October, 2021
Why organisations should prioritise systematic continuous improvement as a strategic priority
Continuous improvement is one of the most important ways to ensure compliance with regulatory operations and successful organisational performance. By continuously identifying areas for improvement, education and training organisations can […]
7 months ago
14 October, 2021
Message from the CEO
Message from the CEO We need to make sure we eliminate any issues that lead to decreased student engagement and an increase in drop-out rates. We need to think about […]
7 months ago
19 September, 2021
Converting the audit quality practices to system-centred rather than individual-auditor-centred
When we talk about “audit quality practises,” we talk about the factors that influence the outcomes of audits conducted on behalf of a regulatory body, such as the behaviour of […]
8 months ago
15 September, 2021
Part 1- The trainer and assessor files
Compliance of your trainer records is a must for any Registered Training Organisation. If you do not know what you are looking for, you will always have difficulty finding it. […]
8 months ago
8 September, 2021
Part 1- The importance of internal audits
This is our first article in the series regarding “Internal audits”. Our main intention is to provide you with the required knowledge and skills, and equip you with the necessary […]
9 months ago
31 August, 2021
Various phases of the assessment and validation processes (Part 3)
This is Part 3 of the article, where we are discussing the different phases of the validation processes an RTO should be following to ensure they meet regulatory requirements and […]
9 months ago
18 August, 2021
Assessment issues that may have an impact on your RTO audit (Part 2)
This is Part 2 continuing from the previous newsletter. As discussed in Part 1 of this article, there are a number of assessment-related issues that may affect your audit outcome. You should […]
9 months ago
5 August, 2021
Assessment issues that may have an impact on your RTO audit (Part 1)
It is important to look into ASQAs 2017 report that shows: Around 72% of RTOs FAIL audit on Assessment Approximately 50% of those FAIL to be able to rectify their […]
10 months ago
13 August, 2021
Various phases of the assessment and validation processes (Part 2)
This is Part 2 of the article, where we are discussing the different phases of the validation processes an RTO should be following to ensure you meet regulatory requirements and […]
10 months ago
28 July, 2021
Various phases of the assessment and validation processes (Part 1)
In this article, we will discuss different phases of validation processes that you should be following in your RTO to ensure you meet regulatory requirements and industry expectations. Validation of […]
10 months ago
3 June, 2021
Part 1- Contextualising of assessment resources
Contextualisation of training packages, accredited curricula and learning resources can be achieved without compromising the Standards for Registered Training Organisations (RTOs) 2015. Contextualisation is the addition of industry-specific information to […]
12 months ago
1 December, 2020
Writing your Training and Assessment Strategy – Part 1 of Part 5
A Training and Assessment Strategy (TAS) is the approach of, and method adopted by, an RTO with respect to training and assessment designed to enable learners to meet the requirements […]
1 year ago
1 December, 2020
How to complete a compliant Trainer Matrix – Part 1 of Part 5
We believe that representatives of the training organisations and trainers usually do not understand the importance of the correct and current trainer matrix available for audit. If you do not […]
1 year ago
6 May, 2019
Internal audits and why they are so important (Part 4 of 5)
In the first three parts of this series we discussed the following: What are internal audits? What are the benefits of conducting internal audits? What is an audit scope? What […]
3 years ago
28 May, 2019
Your trainer and assessor files (Part 4 of 5)
In the last newsletter, we discussed the following: ASQA Guidelines on “industry currency.” How to stay up to date in terms of “industry currency.” Factors that influence “industry currency.” What […]
3 years ago
28 May, 2019
Internal audits and why they are so important (Part 5 of 5)
In the first four parts of this series we discussed the following: What are internal audits? What are the benefits of conducting internal audits? What is an audit scope? What […]
3 years ago
9 October, 2018
Different phases of assessment and learner validation processes (Part 2)
This is Part 2 of the article, where we are discussing the different phases of the validation processes an RTO should be following to ensure you meet regulatory requirements and […]
4 years ago
10 September, 2018
Different phases of assessment and learner validation processes (Part 1)
In this article, we will discuss different phases of validation processes that you should be following in your RTO to ensure you meet regulatory requirements and industry expectations. Validation of […]
4 years ago
10 September, 2018
Assessment issues that may impact your RTO audit (Part 1)
It is important to look into ASQAs 2017 report that shows: Around 72% of RTOs FAIL audit on Assessment Approximately 50% of those FAIL to be able to rectify their […]
4 years ago
11 May, 2020
Annual declaration on compliance
Are you confident that your RTO meets current compliance requirements with RTO standards? Or do you need help? All Australian Registered Training Organisations (RTOs) are required to submit an annual […]
2 years ago
18 November, 2019
Unpacking ASQA audit reports and files (Part 4)
This is part 4 of a series. We are referring here to cases from different audits conducted by the Australian Skills Quality Authority (ASQA). 1. Units made compliant, qualifications become […]
3 years ago
18 March, 2019
Internal audits and why they are important (Part 2 of 5)
In the first part of this series we discussed the following: What are internal audits? What are the benefits of conducting internal audits? What is an audit scope? What is […]
3 years ago
10 April, 2019
Internal audits and why they are so important (Part 3 of 5)
In part 1 & 2 of this series we discussed the following: What are internal audits? What are the benefits of conducting internal audits? What is an audit scope? What […]
3 years ago
1 October, 2019
Unpacking ASQA audit reports and files (Part 3)
Let’s look into what is actually going on in the audits and ASQA practices. This is part 3 of the ongoing series. We are referring here a number of cases […]
3 years ago
18 September, 2019
Unpacking ASQA audit reports and files (Part 1)
Let’s look into what is actually going on in the audits and ASQA practices. We are referring here a number of examples from the audits conducted and the matters discussed […]
3 years ago
11 May, 2018
Industry Expert reveals lessons learnt from 65+ ASQA Audits
Sukh Sandhu’s Interview conducted by EduTemps During his 20 years in the VET and Higher Education sector, Sukh Sandhu has witnessed a radical shift in compliance landscape. Here he shares […]
4 years ago
9 October, 2018
Assessment issues that may impact your RTO audit (Part 2)
This is Part 2 continuing from the previous newsletter. As discussed in Part 1 of this article, there are a number of assessment-related issues that may affect your audit outcome. You should […]
4 years ago
5 November, 2018
Different phases of assessment and learner validation processes (Part 3 of 4)
This is Part 3 of the article, where we are discussing the different phases of the validation processes an RTO should be following to ensure they meet regulatory requirements and […]
4 years ago
5 November, 2018
Internal audits and why they are important (Part 1 of 5)
This is our first article in the series regarding “Internal audits”. Our main intention is to provide you with the required knowledge and skills, and equip you with the necessary […]
4 years ago
5 November, 2018
Your trainer and assessor files (Part 1 of 5)
Compliance of your trainer records is a must for any Registered Training Organisation. If you do not know what you are looking for, you will always have difficulty finding it. […]
4 years ago
10 April, 2019
Your trainer and assessor files (Part 2 of 5)
In the last newsletter (published in November 2018) we discussed the following: Legislative and regulatory requirements Requirements for all trainers and assessors Trainer CVs In part 2 of the series, […]
3 years ago
6 May, 2019
Your trainer and assessor files (Part 3 of 5)
In the last newsletter we discussed the following: The definition of vocational competency ASQA Guidelines on “vocational competence” The three C’s of Vocational competency related to demonstrating skills and knowledge […]
3 years ago
4 July, 2019
Internal audits and why they are so important (Part 5 of 5)
In the first five parts of this series we discussed the following: What are internal audits? What are the benefits of conducting internal audits? What is an audit scope? What […]
3 years ago
11 September, 2018
Contextualising assessment resources (Part 1)
Contextualisation of training packages, accredited curricula and learning resources can be achieved without compromising the Standards for Registered Training Organisations (RTOs) 2015. Contextualisation is the addition of industry-specific information to […]
4 years ago

Categories
Archives
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- December 2020
- November 2020
- May 2020
- February 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- May 2019
- April 2019
- March 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- November 2016
- October 2016
